反应釜混合机结构构成

发布时间:2017/6/2 9:57:45

磁力反应釜混合机功能强大，但是，结构却很简单。磁力反应釜在广泛的应用中凸显其优势，下面我们来看一看关于磁力反应釜的结构的介绍吧。主要由磁力反应釜捏合部分、磁力反应釜机座部分、液压系统、传动系统、真空系统和电控系统等六大部分组成。

The magnetic reactor mixer is powerful, but the structure is simple. The magnetic reactor has highlighted its advantages in a wide range of applications. Let's take a look at the introduction to the structure of a magnetic reaction vessel. It is mainly composed of six parts, such as magnetic reaction kettle, kneading part, magnetic reaction kettle, machine base, hydraulic system, transmission system, vacuum system and electric control system.

　　捏合部分由缸体、浆轴、墙板、缸盖等组成。液压系统由一台液压站来操纵两只小油缸和两个大油缸，来完成启闭大盖、翻动搅拌缸功能，系统设计压力为7.0Mpa。

　　电控系统有手动、自动电控系统，由用户任意选择

The kneading part is composed of a cylinder block, a pulp shaft, a wall plate, a cylinder head, etc.. The hydraulic system is operated by a hydraulic station to control two small oil cylinders and two large oil cylinders to perform the functions of opening and closing the big cap and changing the mixing cylinder. The system design pressure is 7.0Mpa.

The electric control system has manual and automatic electric control system, which can be chosen by users at will

　　磁力反应釜传动系统由电机、减速机和齿轮组成、根据捏合机型号配套电机。

　　磁力反应釜在传动过程中，可由电机同步转速，经弹性联轴器至减速机后，由输出装置传动快浆，使其达到规定的转速，也可由变频器进行调速。捏合机可制成普通型、压力型、真空型、高温型四种，调温形式采用夹套、蒸汽、油 捏合机加热、水冷却等方法，采用液压翻缸及启盖。出料方式有液压、翻缸倾倒、球阀出料，螺杆挤压、液压翻板出料等。并可通过PLC实时控制及记录生产中的温度、时间、粘度等相关数据。缸体及浆叶与物料接触部分均采用不锈钢、合金钢、锰钢等材质制成，确保产品质量。

The driving system of a magnetic reaction kettle is composed of an electric motor, a speed reducer and a gear, and a motor is matched according to the kneading machine type.

In the course of transmission, the magnetic reaction kettle can be synchronous rotating speed by the motor, and then it is driven by the output device through the elastic coupling to the speed reducer, so that it can reach the required speed, and also can be regulated by the frequency converter. The kneading machine can be made into four kinds of common type, pressure type, vacuum type and high temperature type. The temperature regulating type adopts a jacket, steam, oil kneading machine, heating and water cooling, etc. the hydraulic inverted cylinder and the opening cover are adopted. The discharging method includes hydraulic pressure, tilting cylinder dumping, ball valve discharging, screw extruding, hydraulic turning, plate discharging and so on. And through PLC real-time control and record the production of temperature, time, viscosity and other related data. The cylinder body, the pulp and the material contact parts are made of stainless steel, alloy steel, manganese steel and so on, so as to ensure the quality of the products