高压反应釜内部机件有何质量要求？

发布时间:2017/7/11 14:02:11

　高压反应釜的内部机件直接关系到反应釜能否正常使用，那么，对于内部机件的高标准要求是什么呢？小编为您总结了以下四点：

　　1、高压反应釜体，搅拌器、内外蛇管等主要机件材质选用符合图纸要求。

　　2、高压反应釜内衬里不渗漏，不鼓包，内蛇管装置紧固可靠。

　　3、高压反应釜体，轴封、搅拌器、内外蛇管等主要机件安装配合，磨损、腐蚀极限应符合检修规程规定。

　　4、内部机件无损坏，质量符合要求。

　　在使用高压反应釜之前，我们先要对各个机件进行检查，符合相关的质量要求，才可以投入正常的使用之中。

The internal parts of the autoclave are directly related to the normal use of the reactor. What about the high standard of the internal parts? Xiao Bian summed up the following four points for you:

1, high pressure reactor body, stirrer, inside and outside the snake tube and other main parts, material selection, in line with the requirements of the drawings.

2. The lining of the autoclave is not leaking, not bulging, and the inner tube is fastened and reliable.

3, high pressure reactor body, shaft seal, agitator, inside and outside the snake tube and other main parts of the installation coordination, wear and corrosion limit shall comply with the provisions of the maintenance procedures.

4, the internal parts are not damaged, the quality meets the requirements.

In the use of high-pressure reactor before, we have to check the various parts, in line with the relevant quality requirements, before they can be put into normal use.