乳化泵和乳化机的区别

发布时间:2017/7/13 17:14:19

一、乳化泵
什么是乳化泵？
    乳化泵是一种通过转定子的精密组合,在高速旋转中产生强大的剪切力以实现混合,粉碎,乳化的目的.高

效的在线分散设备,安装在管路上可对物料进行连续处理。并且消除批次间的品质差异，基本结构由泵腔和一

对定转子组成。

乳化机的运行原理或特点：
    电能是乳化泵动力的来源，它主要是依靠电力的支持，将电能转化为轴承的高速旋转的动力，轴承的高

速旋转产生的强大剪切力下将需要混合的产品进行粉碎，乳化，从而从乳化泵的底部排泄出来。
    乳化泵泵体主要是由泵腔外部和泵腔内部组成，泵腔外部主要采用的材质是不锈钢型号为SS316产品，这

样的材质耐磨，不易生锈。泵腔内部的结构同样是由不锈钢材质组成，而且比外部具有强腐蚀性，耐磨性。

从而更加的好的将一些氧化性液体更好的细分，而又不会导致泵体受损。

二、乳化机
什么是乳化机？
    乳化机就是通过与发动机连接的均质头的高速旋转，对物料进行剪切，分散，撞击。这样物料就会变得

更加细腻，促使油水相融。乳化机中以真空均质乳化机、高剪切乳化机，都是几年来进入批量生产的具有世

界先进水平的乳化机新品。尽管国内乳化机行业取得了如此令人瞩目的成就。

乳化机的运行原理或特点：
    在高速旋转的转子外端产生至少15m/s以上的线速度，最高可至40m/s，并形成强烈的机械及液力剪切、

液层摩擦、撞击撕裂，使物料充分的分散、乳化、均质、破碎、同时通过定子槽射出。乳化机就是通过与发

动机连接的均质头的高速旋转，对物料进行剪切，分散，撞击。
    高剪切乳化机采用间歇式高剪切分散乳化均质机是通过转子高速平稳的旋转，借用转子和定子的精密配合，工

作头（转子和定子锻件制造）爪式结构，双向吸料，剪切效率高。乳化机的运转稳定、噪音小、清洗方便、

机动灵活，可连续使用 ，对物料可进行超细分散、乳化。乳化机可广泛适用于工业生产的乳化、均质和分散。

I. emulsion pump

What is an emulsion pump?

Emulsion pump is a kind of precise combination made by rotating stator, which produces strong shearing force at high speed to realize mixing, crushing and emulsifying

The utility model can be arranged on a pipeline to carry out continuous processing of materials. And eliminate the quality differences between batches, the basic structure of the pump cavity and one

Composition of stator and rotor.

The operating principle or characteristics of an emulsifying machine:

Electric energy is the source of emulsion pump power. It mainly depends on the support of electric power. It transforms electric energy into high speed rotating power of bearing, and the height of bearing

The strong shear force produced by the rapid rotation will require the mixing of the products to be crushed and emulsified so as to be excreted from the bottom of the emulsion pump.

The main body of the emulsion pump is composed of the outer part of the pump cavity and the inner part of the pump cavity. The main material used outside the pump cavity is the stainless steel, and the model is SS316

The material is wear-resistant and not easy to rust. The inner structure of the pump cavity is also made of stainless steel, and is more corrosive and wearable than the outside.

Thus better to some oxidation liquid better subdivision, and will not lead to pump damage.

Two 、 emulsifying machine

What is an emulsifying machine?

The emulsification machine is to cut, disperse and impact the material by rotating the homogeneous head connected with the engine at high speed. Then the material becomes

More delicate, to promote the integration of oil and water. In the emulsification machine, the vacuum homogenizing emulsifying machine and the high shearing emulsifying machine are all in mass production for several years

New emulsifying machine of advanced level in the world. Although the domestic emulsifying machine industry has achieved such remarkable achievements.

The operating principle or characteristics of an emulsifying machine:

At the outer end of the rotor at high speed, at least 15m/s of line speed is generated, up to 40m/s, and a strong mechanical and hydraulic shear is formed,

Liquid layer friction, impact tear, so that the material is fully dispersed, emulsified, homogeneous, broken, and simultaneously through the stator slot injection. Emulsifying machine is through and hair

A high-speed rotation of a homogeneous head that connects the material, shearing, dispersing, and impacting the material.

The high shear emulsifying machine adopts intermittent high shearing and dispersing emulsion homogenizer. It uses the precise coordination of rotor and stator to borrow the rotor at high speed and smooth rotation

Head (rotor and stator forgings), claw structure, bidirectional suction, high shear efficiency. The emulsifying machine runs stably, has little noise and is easy to clean,

The utility model has the advantages of flexible and flexible operation and continuous use, and can be superfine dispersed and emulsified for materials. Emulsifying machine can be widely used in industrial production of emulsification, homogenization and dispersion

.