Lithium iron phosphate production line

发布时间:2017/4/11 14:29:57

Pulping system:

Creative realization of the solid powder is not particularly superfine powder powder and liquid uniform, fast, continuous mixing. And can be tailored for the different needs of customers, tailor-made for your company's products: according to the characteristics of your material design targeted process; can be based on your different production needs to prepare the appropriate production equipment to achieve quality and The perfect combination of costs.

High speed disperser:

One: the prepared slurry through the precision output pump evenly transported to the high-speed dispersion machine, the refinement and uniform processing. After the high-speed dispersion machine can be achieved after the micro-uniform slurry and agglomeration refinement, with the macro-homogenization of the mixer, can greatly improve the preparation efficiency of the slurry and the quality of the charge.

Second: equipment operation can be on the material status, temperature, pressure and other parameters in real-time monitoring, and can be related to the parameters of storage and output.

Three: the prepared slurry is transported to the storage tank for storage.

product description:

A: The mixing of the slurry through the precise output of continuous transmission to the high-speed disperser, from the liquid inlet into the dispersion chamber.

Second, the distribution of circular wall on the distribution of dense small round hole, the wheels in the special high-speed motor driven by high-speed circular motion, the running speed of up to 70m / s;

Three: the distance between the diverging wheel and the barrel wall is 1-5mm (specially designed according to different media);

Four: into the dispersion chamber of the slurry in the high-speed wheels under the centrifugal force was quickly thrown out, hit the barrel wall. On the other hand, the narrow gap between the wheel and the barrel wall will make the retention of the slurry to produce a strong shear effect, the combination of these two effects to achieve the dispersion of the assembly of the dispersion.

5: slurry in the dispersion chamber needs to stay within a certain time, so you can achieve uniform distribution of cavity slurry.

Six: The treated slurry flows out of the top outlet.

Vacuum feeder:

1. The use of vacuum powder delivery method, the powder material from the ground to the feeding machine; combined with the principle of cyclone dust to accelerate the settlement of the powder; through the automatic valve control, with the vibration hammer and gas backwash, the material The powder material in the machine is more completely added to the mixing machine.

2. The use of sophisticated transition devices, a variety of specifications to choose from, according to the different requirements of customers choose configuration.

3. Feeding, vacuum pump stop, Pneumatic butterfly valve open, pneumatic vibrator, anti-blown airbag, cut off butterfly valve, and then on the material. The entire delivery process is repeated until the end of the material delivery.

Planetary Blender:

1. Preparation of the glue through the automatic weighing after weighing, adding to the mixing machine; powder material through the feeding machine to join, if you need to add the solvent can be achieved. After the completion of the machine automatically in accordance with the procedures to run ig.

2. Equipment operation can be on the material status, level, temperature, pressure and other parameters for real-time monitoring, and can be related to the parameters of storage and output.

3. The prepared slurry is transported to the storage tank for storage and can be defoamed and pre-cooled.

Glue machine:

1. Solvent by automatic weighing after weighing, adding to the gum machine; powder material by adding a few times to add. After the completion of the automatic operation in accordance with the i-run.

2. The glue machine is equipped with automatic constant temperature heating function, can improve the efficiency of glue.

3. Equipment operation can be on the material status, level, temperature, pressure and other parameters in real-time monitoring, and can be related to the parameters of storage and output.

4. Prepare the glue to the storage tank for storage, and can be defoaming.

Post-treatment deaerator:

1. Deaerator has the function of defoaming and slurry storage. Can be based on customer needs and different characteristics of the slurry using different defoaming mode.

2. After the defoaming of the slurry after the transition and iron, you can directly for the next process.

3. Equipment operation can be on the material status, temperature, pressure and other parameters in real-time monitoring, and can be related to the parameters of storage and output.

4. The entire system, including the deaerator, can be automatically cleaned.

  Automatic production, automatic feeding, high-speed dispersion, recycling, automatic filtration, automatic transmission, batch clear, fully automatic control of the production process, including real-time recording process parameters, generate management reports, etc. , To ensure that the material ftb secondary stability, enhance the quality of the material level, to achieve a seamless continuous high-performance materials, automated production.

1, fully enclosed production, the whole set of equipment using the whole closed operation, no dust pollution and slurry overflow.

2, man-machine interface, fully automated production, production of the whole process of computer control, fully automated online control, automatic weighing material measurement, accurate and convenient.

3, the bottom of the powder feed distance is short, fast automatic control, to avoid the charge back and take the time, branch dust pollution, the Department of automation to absorb powder.

4, double with a cooling cycle tank with a reasonable pottery grinder cooling system designed to effectively charge the material down S f to make the material in the appropriate range of temperature production processing.

5, the main grinding equipment for the rod-type structure of nano-sand mill, the grinding process without metal contact, no pollution to the material, while the hollow rod-shaped structure of the line high speed 'shear force, and has a large flow dynamic separation system , The zirconia beads wear is particularly small, will not destroy the structure of beads at the same time without leakage ball.

Creative realization of the solid imitation rinse is not particularly superfine powder particles and liquid uniform, fast 'continuous mixing.

And can be tailored for the different needs of customers, tailor-made for your company's products: according to the characteristics of your material design targeted process; can be based on your different production needs to prepare the appropriate production equipment to achieve quality and The perfect combination of costs.